Multi Fuel Tube Boilers
Control Panel
Main switch: Use to turn the power on/off. Burner on/off switch: Use to turn the burner on/ off. Burner malfunction signal lamp
Boiler overheat signal lamp: Safety thermostat turns the burner off when the temperature inside the boiler is above 105C. Safety thermostat: Cuts the power off when the temperature inside the boiler is above 105C. To set boiler back in operation it is necessary to wait that temperature is below 70C and then to reset the thermostat by pressing it.
Regulation thermostat: Operating region 25 / 85C. Hour metering clock optional to show the overall sum of hours in operation.
Specifications
- Combustion chamber with Fire tubes with turbulators
- Control panel
- Chimney flue
- Opening for cleaning
- Flow line
- Return line
- Filling tap
- Air vent
- Opening for burner
- Eyepiece
- Insulation 40mm with foil
- Boiler case galv + power coated
- Boiler door left and right hand opening
Features
- Suitable for residential premises, production plants, large workshops, showrooms and other large buildings.
- Boiler is two-stage, triple-draft with large flame tubes that enables high level utility of heat extraction.
- Integarted damper control.
- High quality insulation prevents against heat loss.
- Outer part of the chamber is made in the form of firing pipes with turbulators.
- Boiler is equipped with control panel for burner controlling.
- Oval construction allows higher working pressures and higher working temperatures (up to 110 degrees).
- All units can have on board compressor.
- Easy access to all parts of heating chamber which facilitates boiler cleaning; 20 minutes approx.
- Hour meter for service intervals (optional).
- Temperature readout for in-boiler water temperature.
- Warranty period is 5 years;
- All power ranges from 45kw can be produced.